With a highly-skilled local fabrication team and modern manufacturing facilities, Himac produce attachments that are truly built to withstand Australia’s tough environment.
Skid Steer Brush Grapple
Grapple onto scrub, unwanted vegetation, fallen branches, logs and more with power and precision that you only get with Himac Attachments’ Skid Steer Brush Root Grapple. With greasable pivot points as well as heavy duty and extreme duty models available, there isn’t a clean-up too messy or too heavy for this Brush Root Grapple attachment.
- The design, with tynes angled up at front edge, allows a larger volume to be picked up by reaching over the debris piles without the front edge digging in and disturbing the ground
- Greasable pivot points
- Cylinder covers on heavy-duty and extreme
- Dual independent grapples
- Includes hoses and couplings
Skid Steer Stump Removal Bucket The Himac Stump Removal Bucket is an innovative multi-use skid steer attachment. Simply insert and lift stumps and small trees out of the ground in a matter of minutes. Its strong curved base and serrated edge allow you to work away effectively while cutting tree roots. The unique design of the Stump Bucket means you can also dig trenches and footings as well as pull up asphalt, demolition and more.
- 300mm wide tip with replaceable cast teeth 13mm high tensile curved base
- Removes stumps, small trees and cuts roots in a matter of minutes
- Dig footings and trenches up to 36”, demolition, pull up asphalt/concrete
Skid Steer Slasher
With a new, improved design and even more value-packed in, our heavy-duty Skid Steer Slasher is ideal for creating fire breaks, scrub clean up, clearing fence lines, trimming small trees before a stump removal along with other vegetation control and general landscaping duties.
This slasher is also Worksafe approved with front and rear safety chains and a reinforced slasher deck, you can work confidently knowing that this attachment will not put you at any unnecessary risk of causing harm on the job.
- Reinforced 6mm thick slasher deck, safety chains fitted
- Run down clutch protection, high speed hydraulics
- Heavy duty twin blade carrier
- Australian Worksafe approved
- 3” diameter cutting capacity
- Includes hoses and couplings
- Extreme duty models up to 8” cut capacity also available
Skid Steer Push Rake
The Push Stick Rake from Himac Attachments gives you amazing vegetation control with its heavy duty build and side wings. This unique skid steer attachment makes incredibly short work of clearing land, fence lines, debris and other vegetation. The spacing between its tynes provides excellent sifting to minimise waste and maximise productivity.
Designed and constructed here in Australia for harsh Australian conditions using only strong, high quality materials, you can be confident throwing your skid steer’s power behind this stick rake through challenging vegetation time and time again. If you’re thinking tough, you’re thinking Himac.
- Robust construction with side wings
- Ideal for clearing vegetation, fence lines, etc…
- High grade steel tynes
- 155mm spacing between tynes, 900mm height
- Rear tyne stabilisers for support when standing
- Tynes feature curved front
For the very best in machinery attachments for vegetational control, contact the friendly team at Himac on 1800 888 114, send an email at [email protected] or browse their product range online at http://himac.com.au
Avant debuts new compact 800 series loader.
The completely new Avant 800 series is the largest and most powerful loader series to date from Finnish manufacturer Avant Tecno. It pushes the limits of compact loader’s performance with a huge 1,900 kg lift capacity and 3.5 m lift height. Its dimensions – 1.5 m wide, 3.4 m long, 2.2 m high and weight starting from 2,500 kg – and articulated design make the Avant 800 series a very versatile and powerful compact loader.
A hydrostatic transmission with a hydraulic drive motor on each wheel, combined with two drive speed areas is a familiar feature of Avant compact loaders. The maximum drive speed of the Avant 800 series is 30 km/h and auxiliary hydraulics oil flow for attachments is as high as 80 l/min.
The telescopic loader boom is standard feature on the Avant 800 series. The boom extends and retracts 825 mm hydraulically with a maximum lift height of 3.5 m to the hinge pin. This enables loading on trucks with high sides and unloading from high levels. The hydraulic self levelling system automatically keeps the load level when lifting and lowering the boom.
The Avant 800 series is equipped with a quick attach system – other systems like Euro 3 will be available as an option. The hydraulic attachment hoses are coupled with a multi connector, that allows easy connection, in all conditions, with a single hand movement.
The Avant 800 series has a certified ROPS/FOPS open cab as standard; an enclosed DLX heated cab is available as an option. This DLX cab mounts on the chassis of the compact loader with anti-vibration mounts, which guarantees excellent noise and vibration isolation. Efficient heating, ventilation and large windows further improve user comfort. The DLX cab can also be air conditioned.
The comprehensive Avant attachment range – over 200 attachments – is also available for Avant 800 series. This makes the Avant 800 series a very versatile and useful compact loader that is ideal for arboriculture, landscaping, construction, property maintenance, agriculture and materials handling.
It is anticipated that the Avant 800 series will be introduced into Australia in late 2019.
For information about the Avant range of compact loaders and attachments visit www.avantequipment.com or call 1800 686 411.
When looking to pair a Tobroco Giant Loader or other loaders with the optimal attachments for all arborist jobs, look no further than Slanetrac.
Manufactured in the UK, the specialist mini digger attachments can be used across a wide range of work sites and jobs making businesses more versatile and efficient. Read on for more information on each attachment and how it can be used.
HS55 Saw Head
The Slanetrac HS55 Mini Digger Saw Head Attachment is available for mini diggers ranging from 2 tonne to 7.5 tonne. With an ability to cut up to 150mm diameter material, the Slanetrac HS55 Saw Head Attachment is a great tool that can deal with rougher thicker hedges and bows whilst still having the ability to produce neat, tidy hedges with clean cuts with more satisfactory conditions for re-growth fast, efficiently and safely.
Also available: HS75 Saw Head.
HC150 Hedge Cutter Bar
The Slanetrac HC150 Mini Digger Finger Bar Hedge Cutter Attachment suits a wide range of machines. With a cutting thickness of up to 40mm, the Slanetrac HC Series Mini Digger Finger Bar Hedge Cutter offers clean cuts allowing for neat tidy hedges with more satisfactory conditions for re-growth compared to flail cutting attachments as well as ensuring minimum disturbance for wild life.
Also available: HC180 Hedge Cutter.
FH80 Flail Cutter
The Slanetrac FH80 Mini Digger Flail Cutter Attachment is designed for mini diggers from 1.5 tonne to 2.5 tonne. The robust low maintenance Slanetrac HC Series Mini Digger Flail Cutter has individually replaceable cutting blades come supplied with adjustable mounting brackets to suit your particular machine and hydraulic pipes to connect to your machines rock breaker lines for fast effortless installation.
Also available: FH100 Flail Cutter.
Swivel Trim Hedge cutter
The SA-1000 Swivel Trim Tractor Front Loader Finger Bar allows you to convert a Front Loader quickly to a hedge trimmer. The SA-1000 Swivel Trim Tractor Front Loader Finger Bar Hedge Trimmer is a quick and easy system allowing you to perform neat hedge trimming. This system is connected to the tractor hydraulics, so you need a tractor with a suitable hydraulic flow for it to operate properly.
This compact Track Dumper has a maximum width of 750mm and a length of 1900mm. It can turn on its own length offering greater accessibility and maneuverability in urban areas or areas where larger plant can’t gain access.
Complete with hi tipping capacity; the Slanetrac HT1000 Petrol Track Dumper offers a tipping height of 1300mm, and easily tips into skips. Also available: Diesel.
RB80 Block Paving Brush
The Slanetrac RB Series Mini Digger Block Paving Brush Cleaner Attachment is suitable for diggers from 1 tonne to 7.5 tonne.
- Single Soft Wire Brush: this is a single soft steel wire brush with a working area of 450mm diameter soft wire brush ideal for cleaning cobble lock, paving, concrete, tarmacadam
- Triple Soft Wire Brush: this is made up of three smaller soft wire brushes like the one above but has a working area of 800mm diameter. Like the single brush it’s ideal for cleaning cobble lock, paving, concrete, tarmacadam
- Hard Wire Brush: this is made up of 24no individual heavier braided wire ropes mounted to a plate to give you a working area of 450mm. This is designed for heavy-duty cleaning where a lot of debris requires removal
Don’t forget to ‘like’ their social media channels for more updates on the latest machinery news.
For more information or to organise an obligation free demo, call Delta Equipment on 4272 6044 or visit www.deltaequipment.com.au